Developing a shooting hobby or hunting a bird is more than a sport for many.
However, it does require regular maintenance of your gun and the firearms you use so that your hobby goes smoothly.
Maintaining a handgun after its long use – such as spending half of your Sunday with it in the woods or any forest area is not an easy task.
The fact is, for many, it sounds very difficult to clean their guns at home.
Of course, you may get them cleaned with professional cleaning services, and there is nothing wrong with it.
But if you are an avid hunter or a regular gun user, using a professional service may be expensive.
Well, if you want to save a few bucks on cleaning your firearms, certain cleaning steps can be followed at home.
By following the steps carefully, it is possible to get your shotguns, rifles, pistols, and their various parts professionally cleaned within no time in a DIY way.
In the process, you can have a gun cleaner device which is most recommended for cleaning the weapons very efficiently.
Those with less time and a lot of work can get their firearms cleaned with these powerful and most effective ultrasonic handgun cleaners.
It removes all the carbon residues, debris, and stinking smell from your weapons to let the trigger function as usual – better than before.
Why Use Ultrasonic Gun Cleaner?*At no extra cost to you, Ultrasonic-Cleaners.org may earn compensation, if you make a purchase through links on this page.
Ultrasonic weapon cleaners like Hornady, Lyman, iSonic, RCBS, and many more have been used for decades and are the best choice for every shooter today.
These devices used to be expensive a few years back. And only professionals can afford to buy them for cleaning old guns.
However, with changing technology, these are built inexpensively and can be purchased easily using online stores like Amazon.
The main reason to use ultrasonic handgun cleaners is that the weapon attracts lots of dirt, grime, and moisture due to overtime usage.
Due to this, the metal of the gun begins to deteriorate slowly.
Cleaning its exterior and interior parts will help restore it back to a good stage, making it smoother again for ideal shooting.
An ultrasonic weapon cleaner works with powerful high-frequency sound waves and is obviously a great way to clean all your weapon parts.
Even the place where the gun cleaning brush can not reach easily can be easily cleared by the ultrasonic process.
The cavitation inside an ultrasonic gun cleaning device uses the cleaning solution to brush up the stubborn dirt, carbon, and oil residues thoroughly.
It also wipes off all the left traces of moisture that may be accumulated on the gun over time.
7 Best Ultrasonic Gun Cleaners
Choose One for Cleaning Your Guns, Handguns, Rifles, Gun Parts, Brass Cases, Etc.
If you use your gun quite often, you may need to clean your gun parts frequently.
Under various different brands, there are different ultrasonic gun parts cleaners available for the customers to choose from as per their requirements.
These basically differ according to tank capacity and features.
To make your buying process easy, here we list some of the best products and brands that are available for you at the Amazon store.
You can check the detailed reviews for these gun cleaning devices to pick the right one that suits you most.
1. Hornady Hot Tub Sonic Cleaner
Hornady Hot Tub Ultrasonic Cleaner is one of the best-known gun cleaners for cleaning your gun parts and cartridge cases inside out in a very efficient manner.
With sufficient 25.5″ X 7″ X 4″ Interior Dimensions and 9-liter tank capacity, this cleaner machine is convenient and long enough to clean 16” AR upper.
With this Hornady Hot Tub sonic cleaner, there comes a One 1.7 qt inner tank which can be used in the main tank for easy cleaning of parts in smaller batches or for using different solutions simultaneously.
Inner tanks of this ultrasonic gun cleaning device can also be purchased separately and are easily available online.
This cleaning device by Hornady also comes with five temperature settings (from 100-140 degrees F) and integrated drain pans.
Its high-power 4 transducers and heating elements are meant to enhance the cleaning action for gun parts.
There are also the hanging cords that are integrated with this gun cleaning machine to allow larger items to get cleaned efficiently with the help of ultrasonic energy.
Just field strip the major components such as barrel, slide, recoil spring, etc., and place them in the machine.
Overall, Hornady has made ultrasonic cleaning of firearms easier by providing this fabulous machine to the users.
This is simply a product for all avid gun collectors, hunters, police departments, or gunsmiths.
Below is a video if you want to check out my favorite HORNADY machine in action. Hopefully, you will love watching how easy it is to use this device.
2. iSonic Ultrasonic Gun Cleaner
The revolutionary iSonic® Ultrasonic Brass and Gun Cleaner P4820-WSB25 model is again among the best ultrasonic cleaner for guns.
This ultrasonic cleaner for gun barrels comes with digital controls, a heater, timer, and stainless steel wire mesh basket that makes cleaning your gun parts super easy.
The digital timer present in this professional-grade cleaner machine offers 5-settings, where the maximum time you can set is 25 minutes as per the needs.
The dimension of the cleaner tank is 9.6”x5.9”x3”, and its capacity is 2.5L. You can rest assured that the size of the tank is pretty large to facilitate the cleaning of multiple guns at one time.
The good thing about this machine is it also includes a 1-Qt brass and gun cleaning solution to clean all your firearm’s parts (like bolts, trigger, action, magazines, etc.).
You can use the 1:20 or 1:40 ratio of the solution by mixing it up with tap water.
As a precautionary note, DO NOT ever use any other cleaning solutions or agents like liquid bleach in the machine, as these may cause corrosion to its heavy-duty stainless steel tank.
This powerful ultrasonic cleaner for guns can also be employed to clean other items like jewelry, automotive parts, and optical parts.
The industrial-grade transducer here does all the magic and delivers excellent results all the time.
Overall, we can say that the finishing has greatly improved here in this machine (as compared to its previous versions), and you have every reason to settle for it.
3. DK Sonic Ultrasonic Cleaner
The DK SONIC Ultrasonic Cleaner saves a lot of time by using ultrasonic technology to render flawless gun and parts cleaning results.
If you have small guns or pistols to clean, investing in a big-size cleaner machine doesn’t make sense. And this is where the DK Sonic machine proves very helpful.
This best ultrasonic cleaner for guns comes with a 2L tank comprised of stainless steel material that holds the parts of a firearm in place while getting rid of grease and grime very easily.
It can clean the carbon residue, dirt, and grime effectively, and the mechanism used is very simple.
As a user, you just need to use the keypad and display to choose one of the pre-set temperature settings ranging from 20~80 degrees Celsius. The time can be set for 0-20 minutes to match the needs.
Note that while using these machines, parts of the gun should be cleaned with only the best-recommended gun cleaning fluids that are explosion-proof and meant to provide flawless results without any damage.
Never use any flammable solutions like alcohol or acetone in the unit unless recommended by the manufacturer.
4. Taihan Ultrasonic Gun Cleaner
Ultrasonic Gun Cleaner by Taihan features a powerful transducer, highly durable stainless steel construction with a built-in timer that makes cleaning of guns fast and efficient.
The capacity of this ultrasonic cleaner for gun parts is a massive 10L that can clean parts of 2 full-size guns and 2 small revolvers at once. It also features a large stainless steel basket and cleaning cover for easy and safe cleaning.
Furthermore, the design of this ultrasonic cleaner for guns is fresh, and it comes with carrying handles for easy transport.
Here in this Taihan machine, you also find a powerful industry-grade transducer that’s efficient in producing 200watts of heat and 240 watts of ultrasonic energy.
The instruction manual that comes with this gun cleaner comprises detailed instructions on ways of using it. There are a complete start-up procedure and process that can help you a lot.
Overall, buyers who opt for this product get a complete gun cleaning kit for flawless results. We hope that you will not get disappointed in choosing this device for all your rifle and Glock cleaning tasks.
5. Kaimashi Ultrasonic Cleaner
The Ultrasonic Cleaner by Kaimashi is another great device for cleaning metal-made firearms efficiently and quickly like a pro.
It comes with digital controls, an LED digital display, and a 15L Stainless Steel tank (SUS 304 construction) with a protective Lid to cover the tank while operating.
Also, there is a stainless-steel cleaning basket to keep the small objects safe while cleaning.
The main purpose of presenting an s.s. lid in a gun parts cleaner device is to prevent the water from getting evaporated during delicate operations.
Besides making it highly durable, manufacturers have set the drains to control the flow of the valve and perform easy cleaning and rinsing for better shine and quality of the product as well.
Additionally, the time and temperature in this ultrasonic gun cleaner device can be easily set to offer you remarkable cleaning results with 3 sets of built-in strengthened transducers.
Overall, this efficient large tank ultrasonic gun cleaner is not just for cleaning larger and high volumes of objects, such as handguns, long dental equipment, and tubes; it is also suitable for various other items in different industries.
6. SharperTek Ultrasonic Cleaner
The SharperTek Heated Ultrasonic Cleaning System is a high-tech professional way to clean your handguns quickly.
The SharperTek ultrasonic cleaner system for gun parts is a powerful multi-purpose machine that is capable of holding one 6″ Revolver or 2 Semi-Automatic Pistols.
To your surprise, this heated ultrasonic cleaning system performs 360 degrees all-round cleaning using water, ultrasonic solution, and ultrasonic waves gently.
The machine is so powerful that it removes all the dirt, carbon, and grease effortlessly, even from the most soiled handguns, in just a few minutes by utilizing a gentle cleaning method with a high cleaning frequency of 40,000 Hz and cleaning power of 7500W.
This Complete Gun Cleaning Package Include:
- 2 Brushes: 1 Nylon and 1 Brass
- Polycarbonate Cleaning Tray
- Polycarbonate Lubricating Pan and Lid
- 1 Gallon Ultrasonic Gun Cleaning Solution
- 1oz Oil with Needle-Point Dispenser
- 2 Gallons Ultrasonic Gun Lubricating Solution
The provided Eco-friendly gun lubricant with the system helps in protecting the guns from getting rust.
This also reduces friction and enhances the shooting power and distance by preventing the gun from getting jammed after a few uses.
Overall the SharperTek handgun ultrasonic cleaner system provides you with everything you need for cleaning, maintaining, and protecting your guns.
You can restore your weapons in just a few minutes to make it just-like-new with this powerful ultrasonic gun cleaning system that offers the most advanced technology on the market.
7. Lyman Ultrasonic Gun Cleaner
Lyman is in the ultrasonic cleaning industry for the past few years.
They have been providing the most powerful cleaning machines for common users as well as for professionals who want to use their ultrasonic gun cleaning devices commercially.
Devices such as Turbo Sonic Power Professional Ultrasonic Cleaner and Lyman Turbo Sonic 6000 Case Cleaner (115 Volt) are their bestselling.
The Lyman’s Turbo Sonic Power Professional Ultrasonic Cleaner is designed extra-long for users who want a high volume of ultrasonic cleaning in one go.
This ultrasonic cleaner for firearms is highly recommended just in case you want a good ultrasonic gun cleaner for cleaning your dirty 22 rifles or handgun parts.
The machine also helps in aggressively deep cleaning and degreasing the rusted metal items from inside and out.
Provided with ten powerful industrial transducers, it enables the gunsmiths, armorers, and shooters to clean their soiled firearms very quickly.
Finally, you have ended up finding the best gun cleaning system that offers you the perfect and advanced method of servicing your gun.
No doubt, there are many more good brands and models like RCBS, Frankford, Flexzion, etc., to choose from.
And you can do your best research if you do not find the above best gun cleaner models up to the mark.
With a good ultrasonic gun cleaner device, you can just expect to get your arms cleaned in not more than just 20 minutes.
This offers the best and most complete handgun cleaning process for your favorite weapon. Isn’t it impressive!
So why not get one now and start saving a good deal of time and money when you want to clean your weapon next time?
In case you want to know a few more easy tips on buying a device or cleaning your long guns, rifles, pistols, suppressor, and barrels in a DIY way, just head-on…
Buying a Gun Cleaning Device
Important Factors You Need to Consider
Picking an ideal automatic ultrasonic device for cleaning your shotguns, long guns, Glocks, or pistols can be confusing.
However, with a few considerations, you can choose the model that is just right for your weapon parts (no matter if you want it for AR-15, AK-47, or any other).
Here are a few essential things you need to check before buying a sonic gun cleaning device:
✅ Tank Size:
Choosing an ideal tank size is an important factor for your gun cleaning needs.
Particularly if you want to clean the dirty rifles (like AR-15 and .22 Long Rifle), you may need to get a device with a bigger and longer tank.
Choosing a piece of equipment with a big shallow tank makes your gun washing pretty much easier. You can also save lots of time by getting more than one gun part cleaned at a time.
As all ultrasonic gun cleaning machines do not have a built-in heater, you should be sure that the machine you choose has one.
This feature is not essential when you are cleaning other items like jewelry, eyeglasses, or dentures at home. But when cleaning firearms, it’s important to choose.
Gun parts are often hard to clean as they contain too much grease and carbon residue.
Using warm/hot water with a solvent dissolves all the gunk faster and is recommended for getting the level of cleanliness you desire.
Just like the heater, all the devices do not have a basket too. When choosing your device, check that it comes with a stainless steel basket.
This will allow you to put smaller gun parts safely in the bathtub instead of placing them on the bottom of the tank, which is not a good option.
This is again an important check when choosing a great device for gun cleaning and other items.
In general, most cleaning machines generate a 40 kHz frequency. And that’s more than enough range for cleaning the small-sized detailed gun parts like pinholes and primer pockets.
However, if you are buying a machine that can also clean other items that caries much finer details (like your jewelry) you may need to get a machine with a higher frequency range.
Higher frequency generally means a higher number of smaller bubbles produced in the machine that can safely reach the intrinsic parts of the detailed items you want to clean.
This is not mandatory to choose from but can ease your task.
With this feature in your device, you can set it and leave the machine unnoticed to perform other chore tasks.
With the set time interval, the machine shuts down automatically – which means safer and much more affordable cleaning in the long run.
Pricing should not be your concern when you want to get a machine for professional cleaning of the firearms and parts.
You should pick a machine that is big enough and can clean many parts at a time.
However, if you are a hobbyist or a shooter who uses firearms very often, you can go with a small-sized machine that comes in a lower price range.
What Liquid to Use in a Machine?
As mentioned before, the type of cleaning fluid you use in the ultrasonic cleaner machines matters a lot as there is lots of grease, carbon, dirt, and grime to be worked upon.
While cleaning the firearms make sure that you use the best recommended explosion-proof ultrasonic cleaning solution for guns and their parts.
This means flammable liquids like IPA (isopropyl alcohol) and all kinds of acids, bleach, and bleach by-products should be avoided in the machine as they can create hazardous conditions.
If you love to be a DIYer, you can, of course, use a homemade ultrasonic cleaner solution for gun parts.
But if you want a professional level of cleaning, it’s best to buy and use the solution from the same brand (as your machine).
The best ultrasonic gun cleaner solutions that can help you get the best cleaning results without any hassle are:
1- Hornady Sonic Cleaner Solution
In case you are worried about finding a sonic gun cleaning solution that fits both your commercial and residential needs, your perfect choice is Hornady sonic cleaning solution.
With the help of this One Shot Sonic Clean Solution in your cleaning machine, you can easily remove the carbon residues, grease, and dirt from your gun parts.
As it’s available in a concentrated form, you can use a 1:20 or up to 1:40 ratio for mixing this solution with tap water. The good thing is it’s safe for all kinds of firearms finishes.
This sonic gun cleaning solution is specially designed for Hornady sonic cleaning machines.
If you are planning to buy a Hornady sonic cleaner, do not forget to buy this solution to get outstanding cleaning results.
2- Lyman Turbo Sonic Cleaning Solution
Lyman turbo sonic cleaning solution is scientifically formulated for Lyman Turbo Sonic machines. However, you can use them in any ultrasonic cleaner device you want to get desirable results.
The solution is made in the USA and is ideal for deep cleaning of gun parts (such as pistol barrels, cylinders, slides, and bolts) when used in the sonic device.
This Lyman Turbo Sonic Cleaning Fluid can also efficiently clean other steel items like reloading dies and mold blocks.
Within a few minutes, it can remove all the oil, dirt, powder residue, carbon buildup, and foul smell from all your gun parts.
Using a Gun Cleaning Kit for Guns
A Gun cleaning kit is a most essential and useful item for you when you need to clean your gun, rifles, and pistols at home in a DIY way.
Basic things which are contained in the kit include:
- Gun Oil
- Cleaning Solvent
- Gun cleaning rod
- Gun cleaning brushes
- Gun cleaning swabs and patches
While using a gun cleaning kit, you need to first use the cleaning patch.
Put a few dabs of recommended gun cleaning oil on the patch (or mop) and put the patch in the rod.
Now pass this patch and rod into the barrel a few times so that the burned gun powder gets to loosen up and cleaned easily.
Once you have done this step, use the brush with bristles and clean the barrel. Depending upon the gun type, you can also use an old toothbrush instead of a rod, brush, and patch for the initial clean-up.
Now use a clean swab of cotton to swap out all the dirty crap in the barrel. If required, you may use another clean patch with a drop of oil to clean and oil the barrel.
Hopefully, the above process is easy to follow and can help you clean your guns at home to make them ready for the next shooting session.
How to Clean Your Gun Without a Kit?
Although using a gun cleaning kit can make your job easier, you can also clean your gun without a kit (and without a cleaning machine).
If you do not use your rifles, guns, or pistols too much, you may not want to invest much money into a gun cleaning kit.
Or, at times when you may have misplaced your cleaning kit and want to get it cleaned urgently without a kit, you can use these methods.
First of all, if your gun is not heavily soiled and you just need to remove the accumulated dust over it, you can use a compressed air can for gun cleaning.
You can buy these cheap compressed air dusters online or make one at home.
This is the simplest method that I use for dusting my firearms. If you want, you can also use a bit of isopropyl alcohol, acetone, or a bit of WD40 for cleaning.
If you find the guns grimed, you can then follow a few additional steps after dusting. Some of the basic things you’ll need are:
- knife or scissors
- soft t-shirt or a paper towel (alternate for cleaning rag)
- long rod type item such as stick or hanger (alternate for gun cleaning rod)
Before cleaning your gun, just ensure that the gun is not loaded.
Unloading a gun is important to ensure that no cartridge or round is left to remain inside the gun.
Be aware: No gun can be considered unloaded if the barrel on which round is loaded is not checked. The cartridge should be checked on the same side through which it’s loaded.
Now when you have carefully checked the gun, it’s time to disassemble your gun properly. Keep all the parts in a safe place where you can clean them properly without any disturbance.
Make sure you know the dissemble process well, as every gun needs to be dissembled differently.
It’s best to remove only those components that the manufacturer suggests. Do not entirely disassemble and then struggle to re-assemble them, making them unusable.
However, a gun’s components such as barrel, slide, magazine, and frame need to be separated.
Note: There are a few guns that need not be disassembled to clean them or to remove the bluing, except the chamber. So check your make and model carefully.
Basic Cleaning Steps
- Now take your cleaning rag (a t-shirt or towel) and cut it into a few small squares. These should be small enough so that it fits down into your gun barrel.
- Take a small rag and dab a bit of oil. Grab the dirty, dissembled bolts and wipe them off for cleaning. Make sure that you remove all the carbon and dirt material to make it look shining once again. Also, ensure that you clean the firing pin properly, which is located inside the bolt.
- Now hold the gun part in such a way that it has chamber and barrel both. This will ensure that all the dirt and carbon residues do not go into the chamber (but go out of the barrel) while cleaning.
- Now get one of that cut-down rags and place it on the chamber with a bit of oil on it. Take the rod-type item and force the rag into the barrel with it. Get it down and up a few times so that the barrel is cleaned correctly.
Also, clean the chamber with your small soft cloth to remove all the residual oil, carbon, and other foreign particles.
Until this step, you may be seeing the nice shine on your gun and its parts.
After this basic cleaning, re-assemble your gun carefully. Without loading, it performs a “functions check” by dry-firing your gun.
This will ensure that your gun is assembled properly and is ready for the next usage.
The above methods and tips may also prove useful for cleaning your BB guns, air guns, pellet rifles, automatic or semi-automatic guns, etc.
Things to Care When Cleaning Your Firearms
Cleaning your gun is important after shooting so that you keep it safe and in good working condition for your next usage.
However, there are a few essential things you need to take care of while cleaning your antique guns at home. These are:
1- Careful About Not To Rub The Bore:
All firearms record their history, which is why most people look down the barrel of the gun.
Any experienced eye can tell the number of the shots and the maintenance applied to the firearm.
Several marks are caused by the careless gun owners who were not good at cleaning and let the rod rub inside the barrel.
Make sure not to repeat this mistake – it just not only looks bad but also creates hassles while firing.
2- Use Cleaned Patch Surface Every Time Unloading The Barrel:
This is very much like mopping the surface and rinsing and moping out.
So, while cleaning the gun, you will get abrasive dirt on the muzzle. Hence, ensure the patch you are using is clean.
The patch dip in the solvent will clean out the dirt. So if you use the same patch again, the same dirt will accumulate in the neck and the chamber.
This is certainly the wrong cleaning practice that should be avoided.
3- No Brushing In The Barrel First:
This is exactly something that can damage your weapon or the firearm.
The brush will pick up the powder residue, moisture, and dirt deposits into the receiver or chamber.
The solvent-dipped brush will drop every minute thing on the way out, so try not cleaning that way.
4- Use a Few Drops Of Solvent:
This is the common misunderstanding that if you use more solvent, the better cleanliness it will provide. The truth is a bit different!
Using more solvent damages the inside of the gun. You should in fact never use the solvent directly on your firearms.
Always use a gun cleaning patch so that it absorbs the extra solvent.
5- Proper Ventilation:
While cleaning a gun, make sure to allow yourself a properly ventilated space. This is important for the following reasons:
- Solvents used in cleaning a gun are mostly noxious and can result in you getting sick after cleaning.
- The solvent and oil might let out a foul smell that might become unbearable.
It is good to always cover your face while cleaning a gun. If possible, clean your gun on a bright and dry day.
6- Storing The Firearms Safely:
Once the cleaning process is over, ensure your gun or a pistol is reassembled and kept in storage, keeping in mind the safety criteria.
A gun is always supposed to be kept in a space that does not absorb moisture.
Invest in a gun safe or a cabinet that’s specifically designed to safeguard your hard-earned possession.
Do You Have to Clean Your Gun After Every Use?
Your newly bought gun may come with packing grease. Getting them cleaned before using them for the very first time is, therefore, a good idea.
But cleaning the guns after every use is a different story.
While this is not important, you should generally clean them if possible. If not, you should at least clean the barrels after each time you fire since this is the area that gets the debris left behind even after a single shot.
If you are using the sonic machine for cleaning, be extra cautious and choose the right fluid.
Using the wrong solvent or scrubbing too hard can unintentionally remove gun bluing, which can expose your gun to potential rust damage.
Can I Put Optics into The Machine?
As a precautionary step, telescopic, electronic lasers, scopes, and red dots should be removed from your gun and should not be put in a machine for ultrasonic cleaning.
However, there are a few manufacturers (such as Trijicon) that claim that all their sites are safe to clean ultrasonically, provided you use them in a proper cleaning solution.
Can I Clean Wooden Gun Parts in The Machine?
Wooden gun parts like stocks should NOT be put in an ultrasonic machine as they can warp, crack or damage completely due to the high temperatures and aggressive ultrasonic cavitation action in an ultrasonic cleaning bath.
Can I Put Cerakote Coated Guns in The Machine?
Usually, a premium quality machine like Lyman’s and Hornady’s will not damage Cerakote-coated guns or even parts made of anodized aluminum.
You just need to make sure that you use the correct time, temperature, and detergent for cleaning.
Can You Clean Spray Guns or Paintball Guns in The Machine?
Paintball guns (used for sporting) and spray guns (used for wall and automotive painting) include components made up of metal.
Most of these parts are safe to clean ultrasonically as long as you disassemble them right and use them right.
To sum up, whatever the lifestyle you are in, make sure that you take time out from your busy schedule to clean your gun so that it always stays in good working condition.
Ultrasonic cleaners can hopefully do the job for you in a hassle-free way.
After all, compromising on your sporting activity is not at all a bad idea! And you will never love to miss a shot when you are competing.